User`s guide

User's Guide
- 217 -
Print is too light
Action
Yes
No
Step 1
1. From the Quality menu,
increase the toner darkness. To
access the Quality menu, do
either of the following:
- If the printer is on a
network, then open a Web
browser and type the printer
IP address in the address
field. Then navigate to
Settings >Printer Settings
>Quality Menu.
Note: If you do not know
the IP address of the
printer, then print a network
setup page and locate the
IP address in the TCP/IP
section.
- If the printer is connected to
a computer by a USB cable,
then open the Local Printer
Settings Utility for Windows
or Printer Settings for
Macintosh.
Note: 8 is the factory default
setting.
2. Resend the print job.
Is the print still too light?
Go to step 2.
The problem is solved.