User`s guide

User's Guide

- 197 -

Action

Yes

Step 3

From the Eco-Mode menu, change the environmental settings. To access the

Eco-Mode menu, do either of the following:

• If the printer is on a network, then open a Web browser and type the

printer IP address in the address field. Then navigate to Settings

>General Settings >Eco-Mode.

Note: If you do not know the IP address of the printer, then print a network

setup page and locate the IP address in the TCP/IP section.

• If the printer is connected to a computer by a USB cable, then open the

Local Printer Settings Utility for Windows or Printer Settings for Macintosh.

Note: When using the Eco-Mode setting, you may notice a reduction in

performance.

Does the print job still take longer than expected?

Install additional

printer memory.

The problem

is solved.