User`s guide

User's Guide
- 173 -
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one
or more of the following:
• From the printer control panel, press
to continue printing.
Note: The printer discards any data received through the parallel port.
• Set the Parallel Buffer to Auto.
- If the printer is on a network, then access the Embedded Web Server.
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- Print a network setup page or menu settings page, and then locate the IP address in the
TCP/IP section.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Network/Ports >Parallel.
3. In the Parallel Buffer field, enter 2.
4. Click Submit.
- If the printer is connected to a computer by a USB cable, then access the Parallel menu through
the Local Printer Settings Utility for Windows or through Printer Settings for Macintosh.
Standard network software error [54]
- On
- On