User`s guide

User's Guide
- 171 -
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- On
- Blinking
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one
or more of the following:
• From the printer control panel, press
to continue printing.
• Unplug the router, then wait for 30 seconds, and then plug the router back again.
• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
• Update the network firmware in the printer or print server.