User Manual

Compliances:
None
Chemical
Resistance:
Storage:
Precautions:
Please refer to the appropriate material safety data sheet (MSDS) prior to using this product.
Warranty:
Devcon will replace any material found to be defective. Because the storage, handling and application of this material is
beyond our control, we can accept no liability for the results obtained.
Disclaimer:
All information on this data sheet is based on laboratory testing and is not intended for design purposes. ITW Devcon
makes no representations or warranties of any kind concerning this data.
For technical assistance, please call 1-800-933-8266
Order
Information:
14240 25 ml DevTube
14265 50 ml Dev-Pak
DA052 400 ml cartridge
3. Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of epoxy should
flow out the edges to display adequate gap fill.)
For very large gaps:
1. Apply epoxy to both surfaces
2. Spread to cover entire area OR make a bead pattern to allow flow throughout the joint
Let bonded assemblies stand for recommended functional cure time prior to handling.
CAPABILITIES:
Can withstand processing forces
Do not drop, shock load, or heavily load
Store in a cool, dry place.
Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion) @ 75°F)
FOR INDUSTRIAL USE ONLY
Acetic (Dilute) 10% Poor
Acetone Poor
Ammonia Poor
Corn Oil
Excellent
Cutting Oil
Excellent
Ethanol
Poor
Gasoline (Unleaded)
Excellent
Glycols/Antifreeze Fair
Hydrochloric 10% Poor
Isopropanol Poor
Kerosene Excellent
Methyl Ethyl Ketone
Poor
Mineral Spirits
Excellent
Motor Oil
Excellent
Sodium Hydroxide 10%
Poor
Sulfuric 10% Poor
Devcon, 30 Endicott Street, Danvers, MA 01923 Tel:(978) 777-1100 Fax:(978) 774-0516 www.devcon.com
ITW