Technical Document

After logging on to your routers setup page, the first thing to do is create a new service. Click on the
"Services" menu then "Add Custom Service". Enter a name for the service, select TCP and enter the
ETH8020's port address for both the start and finish ports. Click "Apply".
Now go to the "Firewall Rules" menu and click "Add" in the Inbound services section. Select the
ETH8020 service and ALLOW always. The "Send to LAN Server" IP address is the ETH8020's IP
address, 192.168.0.97 in the example above but check what it is on your network. Click "Apply" and
that's it. The ETH8020 is now accessible over the internet. Before you close the routers setup pages, go
to the "Router Status" menu and make a note of its ADSL port IP address. This is the routers internet
facing IP address.