Datasheet

dS3484
dS3484 User Manual v4.03
TCP/IP command sets
There are four TCP/IP command sets on four selectable check boxes, of which one or none
may be selected on the TCP/IP config tab. These are ASCII, Modbus, Binary and Binary with
AES256 encryption.
ASCII command set
The ASCII command set allows you to type commands using a TCP/IP terminal program such
as PuTTY. Use PuTTy in raw mode.
Make sure you have you module set to ASCII mode and, after the “update Pending” indicator
has gone out, re-booted the module so the changes take effect.
Copyright © 2016-2018, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
33