Data Sheet
dS2824
dS2824 User Manual v3.01
Connecting I/O to Virtual Relays
Any of the eight digital I/O lines may be connected to a virtual relay. This gives the digital
output the same automation capabilities as the relays. Enter the relay number in the link box
as shown above. Any relay may be selected for an I/O.
When you have configured the I/O, wait for the “Update Pending” light to go out and press the
reset button, as new I/O modes are set on power-up.
Copyright © 2016-2018, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
21