Data Sheet

dS1242

dS1242 User Manual v4.03

Schedules

The scheduler can schedule regular events. These can be once or twice daily with the two start

and stop times and can happen on any selected weekdays.

The Schedule No. is one of eight schedules that can be set up. These are selected with the

Schedule No. box.

The target relay is the local relay that you want this schedule to control.

W/Days selects the days of the week you want this schedule to control the relay. When

highlighted in red, the weekday is active.

There are two sets of Start and Stop times for each of the eight schedules. The relay is set

when the start time transitions from inactive to active, ie. at the start time, and reset when

the stop time is reached. It is not held on or off. It can be changed by other events including

the webpage buttons.

The current time originates from an internet time server. It is read only and cannot be

changed. Therefore you must have an internet connection for the scheduler to operate

correctly.