Data Sheet

dScript

dScript User Manual v2.15

dScript enabled modules

All dScript enabled modules are preprogrammed with a loader program. This enables the

dScript IDE to download new versions of the operating firmware as well as your programs and

web pages. The USB port is used for all communications between the IDE and the module.

DS1242

The dS1242 provides two volt free contact relay outputs with a current rating of up to 16Amp

each, 4 digital I/O, 2 analogue inputs and 1 serial port. The module is powered from a 12vdc

supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core

polarity, DC supplies are required to supply at least 500mA at 12vdc. The relays are SPCO

(Single Pole Change Over) types. The normally open, normally closed and common pins are all

available on the screw terminals.