Data Sheet

dScript

dScript User Manual v2.15

Second program

Lets try something more interesting, please open the WebsiteGauges project from the

examples directory. Look at the program and note the tcpip.ip address, you may need to

change this and the subnet mask below to suit your network. Specifically, you need to make

sure the PC is on the same subnet as the module. In this case 192.168.0.x and that the IP

address is available.

Once you've checked the IP address, you can build and run the program. When the process is

completed you should now run your web browser and enter address 192.168.0.137/index.htm.

The left gauge measures air temperature and if you have no external sensor connected will

probably have a nonsense value such as -50.

Click the buttons, and the relays on the board will toggle.