Data Sheet

BNO055
Data sheet
Page 61
BST-BNO055-DS000-14 | Revision 1.4 | June 2016 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on
to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
4.3.25 GYR_DATA_Z_LSB 0x18
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
Access
r
r
r
r
r
r
r
r
Reset
0
0
0
0
0
0
0
0
Content
Gyroscope Data Z <7:0>
DATA
bits
Description
Gyroscope Data Z
<7:0>
<7:0>
Lower byte of Z axis Gyroscope data, read only
The output units can be selected using the UNIT_SEL register and data output type can be
changed by updating the Operation Mode in the OPR_MODE register, see section 3.3
4.3.26 GYR_DATA_Z_MSB 0x19
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
Access
r
r
r
r
r
r
r
r
Reset
0
0
0
0
0
0
0
0
Content
Gyroscope Data Z <15:8>
DATA
bits
Description
Gyroscope Data Z
<15:8>
<7:0>
Upper byte of Z axis Gyroscope data, read only
The output units can be selected using the UNIT_SEL register and data output type can be
changed by updating the Operation Mode in the OPR_MODE register, see section 3.3
4.3.27 EUL_DATA_X_LSB 0x1A
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
Access
r
r
r
r
r
r
r
r
Reset
0
0
0
0
0
0
0
0
Content
Heading Data <7:0>
DATA
bits
Description
Heading Data
<7:0>
<7:0>
Lower byte of heading data, read only
The output units can be selected using the UNIT_SEL register and data output type can be
changed by updating the Operation Mode in the OPR_MODE register, see section 3.3
4.3.28 EUL_DATA_X_MSB 0x1B
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
Access
r
r
r
r
r
r
r
r
Reset
0
0
0
0
0
0
0
0
Content
Heading Data <15:8>
DATA
bits
Description
Heading Data
<15:8>
<7:0>
Upper byte of heading data, read only
The output units can be selected using the UNIT_SEL register and data output type can be
changed by updating the Operation Mode in the OPR_MODE register, see section 3.3