Specifications

Installation - Electrical
- 22 -
The Devair Dryer Units are equipped with a suitable cord and plug to be installed in the appropriate electrical
receptacle of proper voltage.
To follow is a listing of the various Dryer Units and their electrical requirements. Please make note of the Full Load Amp
and/or Circuit Fuse requirements when installing the Unit, ensuring that the building circuit is suitable for the Dryer
Unit.
Do not, under any circumstances, modify the internal or external wiring of the Unit. Electrical modifications may cause
both electrical failure in the Unit, as well as void the manufacturers 1 (One) Year Limited Warranty.
As the Devair Refrigerated Air Dryer require electricity to operate, the Units must be installed in such a manner that
they comply with all applicable electrical codes.
Also, the Dryer Units are equipped with electrical enclosures not suitable or intended for installation in hazardous
environments.
As with all electrically operated devices, when performing any service work on the Unit, disconnect the Unit from the
power supply. Servicing or maintaining the Unit while connected to power could result in serious injury to personnel
and the Unit.
Model Model
Electrics Electrics
Nominal
Amps
Nominal
Amps
Full Load
Amps
Full Load
Amps
ASD15
HTD18
115/60/1
115/60/1
230/60/1
230/60/3
ASD30
ASD40
ASD60
HTD52
ASD100
ASD150
ASD200
ASD320
ASD400
2.3
5.24
4.3
3.5
6.25
6.25
6.25
6.25
9.82
7.87
8.98
13.7
4.93
1.97
4.23
3.5
2.6
4.58
4.58
4.58
4.58
7.08
5.84
6.78
10.3
3.69
‘ASD’ Series of Refrigerant Dryers. ‘HTD’ Series of Refrigerant Dryers.
HTD26
HTD37
On-Site Electrics
How do I connect the Dryer to power ?
Refrigerated Air Dryers
Information Bulletin IFB-01
March ‘07
For Sales & Service contact:
CENTRAIR Air Systems & Supplies 705-722-5747 [e-mail] www.centrair.ca