Technical information

6
9929en
63
2
1
1 2341 2 1 23
234112 123
6.6.1.1 Valve Clearance Adjust
ments Schematic
6.6 Adjustments Service and Maintenance
● Crankshaft Position 2:
Turn crankshaft one full revolution (360°).
Adjust clearance of valves marked in black on
schematic.
● Crankshaft Position 1:
Turn crankshaft until both valves in cylinder 1
overlap (exhaust valve about to close, inlet valve
about to open). Adjust clearance of valves marked
in black on schematic. Mark respective rocker
arm with chalk to show that adjustment has been
carried out.
© 25 894 4