Technical information

5
9929en
40
Operation
Service 5.1 Service Plan
Deutz maintenance and service schedule = E check = z adjust =  clean = V replace = 
prior to or during 1st trial run, check 2x daily during the breaking-in phase or
when commissioning new and overhauled engines
every 10 operating hours or daily
in operating hours (OH) every
E10 E20 E25 E30 E40 E50 E60 E70 Years
500 1000 3000 5000 6000 12000 12
zz


z V 



V
z
z
z V
z
z
zz


z



z
z

Industrial engines
The specified engine maintenance intervals are
permissible recommended maximums. Depending
on usage, reduced maintenance intervals may be
necessary (comply with the unit manufacturer’s
operating instructions).
# Maintenance must only be carried out by authorise
service personnel
Section
Top lube oil up if necessary 6.1.2/3.1.4
FL 2011 lube oil, see TC 0199-99-3002 6.1.1/ 6.1.2
BFL 2011 lube oil, see TC 0199-99-3002 6.1.1/ 6.1.2
Oil bath (lube oil quality, see TC 0199-99-3002 / Dry type filter 6.4
Oil filter cartridge FL 2011 6.1.3
Oil filter cartridge BFL 2011 6.1.3
Fuel filter cartridge
Change fuel pump/strainer if necessary 6.2.2
Flexible fuel leakage lines, see TC 0138-21-9300 6.2.1/ 6.2.3
Injection valve #
Fuel pre-cleaner 4.2
Intake air cleaner (if available, maintain according to maintenance indicator) 6.4.3 /6.4.4
Battery and cable connectors 6.7.1
Engine monitoring system, warning system (replace if necessary) 3.3 #
Valve clearance 6.6.1 #
V-belt 6.5. #
Crankcase pressure vent valve #
Timing belt, extreme-duty, see adjacent table #
Timing belt, heavy-duty, see adjacent table #
Timing belt, light-duty, see adjacent table #
Check engine for leaks (visual inspection) –
Engine mount (replace if damaged) 9.2
Basic overhaul #