Specifications

7
Safety Issues
1. Location – always insure the unit is properly located away from
hazardous vapor sources, in a solid, level location.
2. Electrical wiring –Insure that connections are properly made, that there
are no breaks in the insulation, and that cables are running where they won’t
be cut, nicked or squeezed during operation.
3. Cooling – always operate the unit with cooling fan properly adjusted.
The temperature of the oil will increase
80 degrees Fahrenheit in 20 minutes
without air flow from the fan.
4. Hot surfaces and fluids – the hoses, pump, motor and tank surfaces can
get quite warm during normal operation, as does the hydraulic oil. Use
proper cooling to keep the operating temperature between 100 and 130
degrees Fahrenheit. Avoid contact with hot surfaces and oil.