Specifications

Electrical system Servicing and maintenance works
© 2008 49
6
Removing the battery
z Always disconnect the minus pole first when re-
moving the battery. Otherwise there is a danger
of short-circuit!
z Remove the fastenings and take out the battery.
Charging the battery
z Unscrew caps.
z Charge the battery with a conventional battery
charger. Observe the manufacturer specifica-
tions!
z Screw in caps.
Installing the battery
z Insert new or charged battery and attach the fas-
tenings.
z Clean the terminals and battery poles with fine
emery paper.
z Connect the plus pole first and then the minus
pole. Otherwise there is a danger of short-circuit!
Make sure the terminals have good contact.
Tighten clamp bolts hand-tight.
z Grease the assembled terminals with an acid-
free, acid-resistant grease.
OBJ_DOKU-16314-001.fm Seite 49 Donnerstag, 24. Juli 2008 11:18 11