Specifications

Operation Operation monitoring

Instruments and symbols

Instruments/symbols Designation Possible display: Measure

Lubricating oil pressure display Lubricating oil pressure below minimum Switch off engine

Lubricating oil pressure display Lubricating oil pressure in the red area Switch off engine

Lubricating oil temperature dis-

play

The temperature display should always be in the

green area and only be in the yellow-green area

under exceptional circumstances

If the pointer enters the orange sector, the engine is

overheating.

Turn off and establish the cause from the Fault

Table

Lubricating oil pressure pilot lamp If the pilot lamp lights up after starting the engine or

while the engine is running, the lubricating oil pres-

sure is too low

Switch off engine

Lube oil level If the pilot lamp lights up after starting the engine or

while the engine is running, the lubricating oil level is

too low

Check lubricating oil level / if necessary top up

Operating hours counter Indicates the previous operating time of the engine Observe the maintenance intervals

Horn With acoustic signal See Fault Table

OBJ_DOKU-16314-001.fm Seite 24 Donnerstag, 24. Juli 2008 11:18 11