Manual

Section 2 - Pre-Operation and Inspection
2-731200570
5. Work Lights (if equipped) - Clean and undamaged.
6. Mirrors
- Clean and undamaged.
7. Cab and Electrical -
• General appearance; no visible damage.
• Frame level indicator and window glass undamaged and clean.
• Gauges, switches, joystick, foot controls, park brake and horn operational.
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware.
8. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
9. Boom Prop
(29.6LP) - See inspection note.
10. Rear Axle
- Steer cylinders undamaged, not leaking; pivot pins secure;
hydraulic hoses undamaged, not leaking.
11. Main Control Valve
- See inspection note.
12. Rear Mirror
(if equipped) - Clean and undamaged.
13. LSI Sensor - See inspection note.
14. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
15. Boom Sensor
(S/N 1160005989 & After including 1160005189, 1160005314 &
1160005414) - See inspection note.
16. Air Precleaner - Check and clean as required.
17. Engine Compartment -
• Drive belts, check condition and replace as required.
• Engine mounts - See inspection note.
• Battery cables tight, no visible damage or corrosion.
• Engine cover closed and properly secured.
18. Wheel Chock
(35.7, if equipped) - See inspection note.
19. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
20. Front Axle
- Steer cylinders undamaged, not leaking; hydraulic hoses
undamaged, not leaking.
21. Attachment
- Properly installed, see “Attachment Installation” on page 5-7.