Instruction Manual

Section 5 - Attachments and Hitches

5-931200114

Hydraulic Quick-Switch Device

This installation procedure is designed for one-person operation.

1. Retract quick-switch device to provide clearance.

Check to be sure lock pin is disengaged.

2. Align attachment pin with recess in attachment.

Raise boom slightly to engage attachment pin in

recess.

3. Engage quick-switch device.

4. Press the button (1) and at the same time

move the joystick (2) to engage or (3) to

disengage the quick-switch device.

5. Raise boom to eye level and visually

check that the quick-switch pin protrudes

through the hole. If the pin does not

protrude through the hole, place the

attachment on the ground and return to

step 2.

6. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic

Operated Attachment” on page 5-10.

OZ0610

OZ0900

ENGAGED DISENGAGED