Instruction Manual

Section 6 - Emergency Procedures
6-2 31200114
6.2 EMERGENCY LOWERING OF BOOM
Valve Layout
Cylinder/Function
A B
Lift Cylinder: Lower Raise
Extend/Retract Cylinder: Retract Extend
Tilt Cylinder: Down Up
Auxiliary Hydraulics
Electronic Control Unit Failure
If the telehandler’s electronic control unit fails, the boom can be retracted then
lowered manually. With the engine running perform the following:
1. Shift transmission control lever to neutral, apply parking brake and block
wheels.
2. Open the rear cover.
3. Using a small tool carefully depress the button (1) on the solenoid.
WARNING
TIP OVER HAZARD. To be used for retracting then lowering load only.
Extending/lifting load could damage the equipment and/or cause tip over.
OZ1560
1
FRONT OF
MACHINE
EXT/RET
LIFT
TILT
AUX
A
B