Workshop Manual

TCD 2015

Fuel system

W 07-06-04

2/14

z Turn over crankshaft until the valve overlap is

achieved on cylinder no. B2.

 T01 63

Valve overlap means:

Inlet valves begin to open and exhaust val-

ves close.

Observe valve clearance setting diagram.

In case of valve overlap of cylinder no. B2:

The locking pin of the turning gear must

snap into the tooth notch (1) of the starter

ring gear.

The second tooth notch (2) must face the

B-bank.

z Pull locking pin (1).

z Turn crankshaft in the opposite direction to the en-

gine rotation (arrow) a ¼ turn with the turning gear.