Workshop Manual

© 06/2006 8216-001
1/10
TCD 2015
Fuel system
W 07-04-01
6
Removing and installating injection pumps.
(Cylinder A1)
Commercial available tools:
– Open wrench size SW 22
Special tools:
– Plugs/caps . . . . . . . . . . . . . . . . . 170160
– Locking agent
DEUTZ DW 59
– W 04-06-03
– W 06-07-03 . . . . . . . . . . . .(A-bank)
– W 07-10-06
– W 07-10-06 . . . . . . . . . . . .(Railway)
Attention!
Pay attention to utmost cleanliness when
working on the fuel system.
Remove residue paint and particles of dirt
before removing.
Clean the respective affected parts care-
fully. Blow damp areas dry with compres-
sed air.
Observe the safety regulations and natio-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia-
tely before assembling.
Collect leaking operating substances in
suitable vessels and dispose of according
to regulations.
Read out error memory of the motor con-
trol timer with SERDIA.
Removing the fuel injector pump
z Remove charge air pipe (A-bank).
 W 06-07-03
© 40552-0