Workshop Manual

1/4

TCD 2015

Cylinder head

W 01-01-01

Setting valve clearance

Commercial available tools:

– Rotation angle disc . . . . . . . . . . . . . 8190

– Screwdriver insert for slot-

ted screws. . . . . . . . . . . . . . . . . . . . 8191

– Open wrench size 13 . . . . . . . . . . . 8196

– Locking agent

DEUTZ DW 59

– W 04-06-03

Allow the engine to cool down for at least

30 minutes before setting the valve clea-

rance. Engine oil temperature < 80 °C

The following work process describes set-

ting of the valve clearance on an exhaust

valve. The setting procedure for an inlet

valve is analogous under consideration of

the specified rotation angle size.

z Unscrew screws (1).

z Remove cylinder head cover (2).

z Remove gasket.

z Attach turning gear.

 W 04-06-03

Setting engine to valve overlap

z Turn crankshaft using the turning gear until the valve

overlap of cylinder A1 is reached.

 T01 63