Workshop Manual

5/8

TCD 2015

Speed control

W 05-07-03

z Determine tightness of the impulse transmitter under

compliance with the permissible distance

dimension (c).

z Permissible distance (c) between camshaft gear

wheel (1) and impulse transmitter (2).

 P05 92

Calculation example

Desired: Compliance with the permissible distance, di-

mension (c)

Gasket

Given: Minimum distance dimension (c1) = 0.30 mm

Dimension (y)

Thickness of gasket = 0.30 mm

Thickness of gasket = 0.50 mm

Measured: -

Calculation: Dimension (c) = minimum

distance dimension (c1) -

dimension (y) + thickness of the gasket

Dimension(c)=0.30mm-

0.86 mm + (2x0.50 mm)

Dimension(c)=0.44mm

Result: Dimension (c) corresponds to the permissible di-

stance, therefore two gaskets with a thickness of

0.50 mm must be used.

z Select new gaskets.

Gaskets are available in thicknesses of 0.3

mm and 0.5 mm.

The correct distance (c) is reached by pla-

cing the appropriate number of gaskets

underneath.