Workshop Manual

17/32

TCD 2015

Engine control

W 04-05-07

z Mount new gasket (1).

z Measure the flange height from the running surfaces

to the lay-on surface with the depth measuring appli-

ance (arrows).

z Note measured value, dimension (b).

z Determine axial backlash.

 P04 35

z Correct deviation with gaskets.

 P04 37

Calculation example

Desired: Axial backlash

Given: -

Measured: (a) = 45.80 mm

(b) = 45.50 mm

Calculation: Axial backlash = dimension (a) - dimension (b)

45.80 mm - 45.50 mm

Result: =0.30mm

z Mount cover (2).

z Fit new sealing rings.

z Tighten all screws (1).

 A04 002

Insert screws with locking agent.

z Mount new O-ring (1).

z Lightly oil O-ring.

z Check oil channel (arrow) for free passage.