Workshop Manual

© 06/2006 8188-001
3/4
TCD 2015
Engine control
W 04-05-06
6
z Insert parallel pin (1).
1
© 40603-0
z Measure the overhang of the parallel pin with the
depth measuring appliance.
 P04 39
z Correct overhang.
© 40604-0
z Place camshaft gear wheel on idler gear.
Note installation position.
The marking (1) on the idler gear faces the
camshaft gear wheel.
The markings (1) and (2) must be opposite
in line.
2
1
© 40605-1