Workshop Manual

TCD 2015

Engine control

W 04-05-05

18/24

z Insert the injection pump camshaft gear wheel in the

camshaft gear wheel.

The marking on the gear wheel must be

between the markings of the injection

pump camshaft gear wheel (1).

z Fasten all screws (1).

Attention!

Make sure no parts fall into the crankcase!

Concealed screws can be accessed by

turning the crankshaft with the turning gear.

Checking the tooth edge clearance of the

injection pump camshaft gear wheel

z Mount magnetic measuring stand.

z Insert dial gauge.

z Turn gear wheel in direction of arrow until it stops.

z Apply stylus under pre-tension to a tooth flank.

z Adjust dial gauge to "0".