Workshop Manual

TCD 2015

Engine control

W 04-05-05

8/24

z Loosen screw (1).

z Turn back the camshaft gear wheel.

z Remove counter holder (2).

z Unscrew screw (1).

z Remove camshaft toothed wheel (2).

Press back the injection pump camshaft

carefully as far as it goes.

z Turn engine 180°.

z Press in all tappets.

z Hang engine on workshop crane.

z Unhook the engine from the assembly block on one

side.

z Pull out the camshaft (1) carefully to the flywheel

side.