Manualshelf

Workshop Manual

ManualsBrandsDeutz Engine ManualsOtherDeutz Engine TCD 2015 Workshop Manual - Job card overview
221222223224225226227228229230
TCD 2015
Crankcase
W 03-11-01
© 06/2006 8183-001
6/8
6
z Mount the new middle camshaft bearings on the op-
posite side to the flywheel so that the recess (1) fac-
es the flywheel.
The diagram shows the camshaft bearing
in the installed state.
The middle camshaft bearings have three
lubricating oil bores.
Make sure the lubricating oil bores (2) in
the camshaft bearing and crankcase are in
line.
2
1
© 37180-1
z Mount the new camshaft bearing (opposite side to
flywheel) so that the recess (1) faces the flywheel.
The diagram shows the camshaft bearing
in the installed state.
The camshaft bearing (opposite side to fly-
wheel) has three lubricating oil bores.
Make sure the lubricating oil bores (2) in
the camshaft bearing and crankcase are in
line.
2
1
© 37181-1
z Insert puller bush in camshaft bearing.
z Insert spindle with puller bush on flywheel side.
© 34723-2