Workshop Manual

5/8

TCD 2015

Crankcase

W 03-11-01

z Insert spindle with counter bearing on the opposite

side to the flywheel.

z Insert puller bush in camshaft bearing and push onto

the spindle.

z Mount spacing sleeve.

z Mount ball bearing.

z Screw on nut.

z Press in camshaft bearing (flywheel side).

Installation depth, see diagram.

z Check that the lubricating oil bores (1) are in line.

If the lubricating oil bore is not in line, the

camshaft bearing must be removed and re-

installed.