Workshop Manual

TCD 2015

Crankcase

W 03-11-01

2/8

Diagram for measuring the camshaft bea-

ring at the points "a and b" in the

levels "1 and 2".

z Insert internal measuring device.

z Balance the internal measuring device at the given

measuring points and read off the measured value at

the reversal point of the pointer.

 P03 13

P03 14

Measuring points see diagram.

When the wear limit is reached, the cams-

haft bearing must be replaced.

Removing camshaft bearing

z Insert spindle (1) with puller bush (2) on the opposite

side to the flywheel.