Workshop Manual

TCD 2015

Crankcase

I 03-10-05

6/8

z Turn the grinding/surface plate (1) forwards and

backwards evenly (approx. 180°).

z Clean the collar rest.

z Remove grind paste and grinding particles.

Lift the grinding/surface plate slightly

several times for the grinding paste to

spread evenly.

Note soft grinding noise.

Repeat the surface process to check.

z Clean inside of the crankcase.

z Remove cover plates (1).

z Check the inside of the crankcase for cleanliness.

The tool set must be cleaned and the grin-

ding/surface plate oiled slightly for corro-

sion protection.

Assembly

z Insert new O-rings (1).

z Coat the O-rings with fitting compound.