Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21753-001.fm
1/6
6
Cylinder liner
TCD 2013 2V W 04-01-01
Removing and installing the cylinder liner
8190
Standard tools
Special tools:
Extraction tool, universal 150170
Tension plate 150171
Assembly lever 150190
Washer 150191
Fitting compound
DEUTZ AP1908
W 01-05-01
W 01-13-01
W 04-01-02
W 06-01-01
Collect leaking operating substances in
suitable vessels and dispose of according
to regulations.
Lubricating oil and coolant must be filled
according to the instructions in the opera
-
ting manual.
Removing the cylinder liner
Remove piston and connecting rod.
W 06-01-01
Unscrew screws (1).
Remove the liner holder (2).
1
1
2
© 44260-0
Pre-mount the disassembly device
Mount the plate (1) on the disassembly device
Adapt the counter support (2) according to the di
-
ameter of the cylinder liner.
1
22
© 43564-0