Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21822-001.fm
1/4
6
Start aid
TCD 2013 2V W 63-02-01
Removing and installing the glow plugs
Standard tools
Special tools:
Assembly tool 120440
User notes
W 19-01-01
Danger!
Wait 30 seconds after switching off the
engine before working on the fuel system.
Attention!
Pay attention to utmost cleanliness when
working on the fuel system.
Remove residue paint and particles of dirt
before removing.
Clean the respective affected parts
carefully. Blow damp areas dry with com
-
pressed air.
Observe the safety regulations and natio
-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia
-
tely before assembling.
Collect leaking operating substances in
suitable vessels and dispose of according
to regulations.
After all work on the fuel system, it must be
bleeded - see the operation manual, chap
-
ter "6 Fuel system“.
Removing the glow plugs
Unscrew nuts (1).
Remove cable (arrows).
Remove injectors.
W 19-01-01
Attention!
Remove residue paint and particles of dirt
from the injector before removing it.
Carefully clean the area around the injec
-
tor.
1
1
© 42728-0