Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21821-001.fm
3/4
6
Start aid
TCD 2013 2V W 63-01-01
Technical Data
Tightening specifications
ID no. Name Screw type Notes / Remark Value
A06 042 Heating flange on charge air manifold M8x100-10.9 Stage 1: 3 Nm
A06 042 Heating flange on charge air manifold M8x100-10.9 Stage 2: 30°
A13 065 Cable connection on heater flange
Hexagonal, pole screw
locked
20 Nm
For the tightening procedure according to torque using a torque wrench, a maximum variation of the
tightening torque of +/- 10% is permissible.