Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21814-001.fm
1/4
6
Electrical equipment
TCD 2013 2V W 48-04-01
Removing and installing the oil pressure switch
Standard tools
Special tools:
Long socket wrench insert 110700
Plugs/caps 170160
User notes
Pay attention to utmost cleanliness when
working on the lube oil system.
Carefully clean the area around the
affected parts. Blow damp areas dry with
compressed air.
Observe the safety regulations and natio
-
nal specifications for handling lube oils.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia
-
tely before assembling.
Removing the oil pressure switch
Unlock cable plug (1) and remove.
1
© 44510-0