Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21805-001.fm
3/6
6
Exhaust gas turbocharger
TCD 2013 2V W 43-01-01
Visually inspect the components.
© 44282-0
Installing the turbocharger
Clean sealing surfaces.
Coat new pin bolts with DEUTZ S1 mounting com
-
pound.
Mount new pin bolts with locking nuts.
Tighten pin bolts (1).
10 Nm
Mount new gasket.
Mount turbocharger (2).
Tighten all nuts.
42 Nm
1
2
© 44283-1
Mount lubrication oil line (1).
Tighten hollow screws (2).
39 Nm
Use new sealing rings.
2
2
1
© 44284-0