Workshop Manual

Table Of Contents
4
© 02/2010 OBJ_DOKU-21741-001.fm
13/18
Technical data
TCD 2013 2V Tightening specifications
A03 080 Connection housing on crankcase/gear case
M16x85-10.9
Observe tightening sequence. TCD 2013 2V
99 Nm 243 Nm
M16x150-10.9
M12x85-10.9 99 Nm
M12x160-10.9 99 Nm
A03 085 Cover plate to connection housing
Observe assembly specifica-
tion.
TCD 2013 2V 9 Nm
A03 092
Gear case on crankcase M8x35-10.9
Observe tightening sequence. TCD 2013 2V
30 Nm
Gear case on crankcase
M8x55-10.9
M8x80-10.9
30 Nm
Gear case on crankcase M16x60 70 Nm
A04 022 Locking cap on gear case
M8x55-10.9
M8x60-10.9
TCD 2013 2V 21 Nm
A04 025 Holder on gear case/crankcase M8x80-10.9 TCD 2013 2V 30 Nm
A05 011 Speed governor (crankshaft) front cover M6x12
Observe assembly specifica-
tion.
Insert with DEUTZ DW72 lok-
king agent.
TCD 2013 2V 9 Nm
A05 012 Speed governor (camshaft) on gear case
Speed governor is installed by
pressing in, not knocking in.
Insert with locking agent
DEUTZ DW72.
TCD 2013 2V 9 Nm
A05 013 Holder speed governor (crankshaft) on front cover TCD 20132V20 Nm
A05 014 Toothed disc on V-belt pulley TCD 2013 2V 60 Nm
A06 001 Exhaust pipe at cylinder head
Observe order of tightening.
Start assembly with fit bore
10.1 mm.
TCD 2013 2V 25 Nm
ID no. Name Screw type Notes / Remarks Series
Pre-tensio-
ning value
Post-
clamping
value