Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21789-001.fm
10/10
6
Injector
TCD 2013 2VW 19-01-01
Technical Data
Tightening specifications
ID no. Name Screw type Notes / Remark Value
A07 001
Injector on cylinder head, clamping
claw
Stage 1:
Observe order of
assembly.
Install injector without
tension.
hand tight
A07 001
Injector on cylinder head, clamping
claw
Stage 2: 27 Nm
A07 003
Injection pipe on rail and injector,
High pressure pipe on high pressure
pump and rail
Union nut
Stage 1:
Observe assembly
specification.
Use new pipe.
10 Nm
A07 003
Injection pipe on rail and injector,
High pressure pipe on high pressure
pump and rail
Union nut Stage 2:
60°
A13 041 Cover plate on cylinder head cover M6x16 self-tapping 8.5 Nm
A13 051 Cable connection on injector 1.5 Nm
For the tightening procedure according to torque using a torque wrench, a maximum variation of the
tightening torque of +/- 10% is permissible.
+15°