Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21787-001.fm
5/10
6
High-pressure pump
TCD 2013 2V W 17-01-04
Push the O-ring (1) with assembly sleeve (2) up to
the groove (3).
Coat the O-ring, mounting bore and chamfers in the
crankcase with fitting compound.
1
2
3
© 43330-0
Insert the high-pressure pump carefully in the crank
-
case.
© 43959-0
Oil the screws (1) lightly and tighten alternately until
the high-pressure pump is flush with the crankcase.
Do not tighten the screws yet.
1
1
© 43958-0