Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21786-001.fm
4/8
6
High-pressure pump
TCD 2013 2VW 17-01-01
Insert control block.
Pre-assemble screws loosely.
Pay attention to different screw lengths.
M8 x 75 mm (2)
M8 x 85 mm (1)
Do not tighten screws.
2
1
© 44003-0
Install fuel pipe. Insert hollow screws (1) and (2) with
new sealing rings tension-free.
Use new sealing rings.
Pay attention to different screws:
Hollow screw M14 (1)
Hollow screws M12 (2)
1
2
2
© 44004-0
Mount fuel pipe.
Insert hollow screws (1) with new sealing rings ten
-
sion-free.
Position pipe clip.
Fasten screw (2) tension-free.
Use new sealing rings.
Do not tighten hollow screws.
Do not tighten the screw.
1
2
1
© 44005-0