Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21780-001.fm
6/8
6
Control parts
TCD 2013 2VW 11-01-01
Turn crankshaft using the turning gear until the valve
overlap of cylinder 1 is reached.
Set control piston according to order of setting.
see page:
–1, 4-cylinder
–2, 6-cylinder
© 44110-0
Loosen lock nut (1).
Press in the adjusting screw (2) to the stop.
The rocker arm must touch the thrust
washer of the spring cap (arrow).
2
1
© 44122-0
Set the rotation angle disc on the adjusting screw
with a screwdriver insert for hexagon socket head
screw.
Fix magnet of rotation angle disc on cylinder head.
Set the rotation angle disc in the direction of the ar
-
row to „0“.
Do not rotate adjusting screw.
© 44123-0