Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21779-001.fm
3/6
6
Control parts
TCD 2013 2V W 11-01-01
Setting the inlet valve clearance
Loosen lock nut (1).
Press in the adjusting screw (2) to the stop.
The rocker arm must touch the thrust
washer of the spring cap (arrow).
1
2
© 44113-0
Set the rotation angle disc with a socket wrench in
-
sert at the adjusting screw.
Fix magnet of rotation angle disc on cylinder head.
Set the rotation angle disc in the direction of the ar
-
row to „0“.
Do not rotate adjusting screw.
© 44114-0
Turn back setting screw 90° in direction of arrow.
90°
© 44115-0