Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21777-001.fm
4/4
6
Camshaft
TCD 2013 2VW 10-02-01
Push on and align the flywheel side assembly block.
Install clamping holder (1) on adapter boards (2).
90 Nm
1
1
2
2
© 44472-0
Unhook the crankcase from the workshop crane.
Unscrew screws (1).
1
1
© 44471-0
Install crankshaft.
W 05-05-01
Install rocker arms and rocker arm brackets.
W 11-02-01
Install high pressure pump and roller tappet (installa
-
tion position B).
W 17-01-05
Install high pressure pump and roller tappet (installa
-
tion position A).
W 17-01-04
© 44220-0