Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21776-001.fm
7/10
6
Gearcase
TCD 2013 2V W 09-02-02
Clean sealing surfaces.
Fill the ring groove (arrows) with packing compound.
The sealing surfaces must be dry and free
from grease and dirt.
Use packing compound DEUTZ DW 48.
Sealing bead thickness approx. 1.5 mm.
© 44462-0
Mount cap (1).
Tighten screws (2).
Note the installation position of the cap (1).
Use M8 x 50 mm screws.
Mount holder (arrow).
Do not tighten screws.
2
1
2
© 44463-0
Clean sealing surfaces.
Mount the new O-ring.
Lightly oil O-ring.
© 43983-0