Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21771-001.fm
4/6
6
Cylinder head
TCD 2013 2VW 08-04-01
Oil the valve stem lightly.
Insert the valve in the valve guide by turning with a
slight pressure.
Do not damage or press out the valve stem
seal when inserting the valve.
© 44170-0
Insert valve spring (1).
Insert valve spring plate (2).
The closely wound end of the valve plate
faces the cylinder head.
2
1
© 44171-0
Mount assembly lever.
Press down the valve spring with the assembly lever
and insert both tapper collets (1).
Make sure the tapper collets fit correctly in
the valve keyway.
1
© 44172-0