Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21769-001.fm
4/8
6
Cylinder head
TCD 2013 2VW 08-03-01
Select cylinder head gasket according to the largest
piston projection measured.
0,28 - <0,54 mm
0,54 - <0,64 mm
0,64 - <0,75 mm
1 hole, cylinder head gasket 1.42 mm
2 hole, cylinder head gasket 1.52 mm
3 hole, cylinder head gasket 1.62 mm
Example: Piston projection = 0.7 mm cor
-
responds to cylinder head gasket with
3 holes (arrow).
© 44154-0
Make sure the clamping bushings (arrows) are in
place.
© 44155-0
Fit a new cylinder head gasket.
The sealing surfaces for the cylinder head
gasket must be clean and free of oil.
Label OBEN / TOP facing the cylinder
head.
© 44156-0