Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21762-001.fm
8/8
6
Connecting rod
TCD 2013 2VW 06-01-02
Checking the con rod
Mount connecting rod on test instrument without
bearing shells.
Move test fork in direction of arrow.
Check that the con rod is parallel.
Permissible deviation from (A) to (B).
0,05 mm
Attention!
Aligning the con rod is not permissible.
Distance between “A“ and B“ = 100 mm.
B
A
© 30579-1
Move test fork in direction of arrow.
Check the angle of the con rod.
Permissible deviation from (C) to (D).
0,05 mm
Distance between “C“ and “D“ = 100 mm
D
C
© 30580-1