Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21761-001.fm
4/8
6
Connecting rod
TCD 2013 2VW 06-01-01
Oil the piston bolt lightly.
Press the piston bolt through.
Insert new locking ring.
Ensure that the installation location is free
from faults.
© 44254-0
Installing the piston and con rod
Make sure the clamping bushings (1) are
in place.
1
© 44211-0
Insert bearing shell in the con rod.
Note the assignment of the bearing shells.
The anti-rotation lock (1) must lock in
groove (2).
1
2
© 44215-0